HKS Hipermax IV GT Gewindefahrwerk für Subaru Legacy B4 (incl. Touring)
2.249,90 €
inkl. 20 % MwSt. zzgl. Versandspesen
Lieferzeit: 2-3 Wochen
Artikelnummer: 80230-AF004
Kategorien: Fahrwerk, Gewindefahrwerke und Zubehör
Schlagwort: HKS
Tuningmarke: HKS
 |
Code No. 80230-AF004 |
 ▲The above photo is an item for BRG. |
Awesome control and comfort ride on the street for a sporty drive. The new Max IV sporty suspension. |
| Application | Specification | |||||||||||||||||||||||||||||||||||||
|
|
| Ride Height | mm | ||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| *1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS‘ recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle. |
| Kit information | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spring of Full Kit | |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specification of damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| * The value of the damping force is at piston speed of 0.1m/sec. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Setting data | |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| * Refer to the above explanation *3 of ride height information for drivable high and low limitations. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test vehicle information | |||||||||||||||||||||||
|
|||||||||||||||||||||||
| * Test data at HKS. | |||||||||||||||||||||||
| Parts List * It may be changed without prior notice. |
|
| Point |
| ・Increasing 1 kg of spring rate of front and rear from MAX III enhances the stability during high speed driving furthermore. ・Focusing on the ride quality leads to the product quality improvement, and gradual suspension movement is pursued. ・Adequate posture change and supple damping strike balance between riding comfort and sportiveness while maintaining the vehicle’s high-quality image. ・Smooth and non-fluffy vehicle movement is provided so driving becomes comfortable for all passengers. ・Soft and gradual movement enables the driver easily to know the load changes so a car becomes more capable of fast cornering on a winding road. ・Recommended dial position is 10 in front and 15 in rear. Adjust the dial to 20 in front and 25 in rear for relaxing driving. ・The vehicle height is only calculated numbers except the height at the test. (It does not guarantee the actual height.) ・To install this product to BRG, extend the rear damper length by 3mm so the case length becomes 243mm. Do not adjust the case length shorter than 243mm to prevent the brake hose from coming in contact with this product at full bump. ・-41mm is the maximum amount BRG’s rear can be lowered with this product. Using the Helper Spring Set can lower the rear height up to -54mm. (Helper Spring Set is available separately.) |
Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.
Bewertungen
Es gibt noch keine Bewertungen.