HKS S-Type Ölkühlerkit für Nissan 370Z Single-Core Kit

■Features

• When driving the Z34 and the engine oil temperature goes above 135℃ (130℃), the fail-safe will limit the throttle duration and the max RPM. But this kit will prevent the fail-safe system to activate.
• 15 rows core (W200 X H220 X T48) is in front of the radiator.
• For installation of the kit you need parts modification of resin protector and alternator bracket.
• Installation requires approximately 3 hours.

■Characteristic

At the Fuji Speedway test drive with the stock, we couldn’t even go for one lap because of the fail-safe, but with the HKS Oil Cooler Kit installed we could go for 6 laps.
* We recommend the twin core kit for long run at the circuit.

* The output data is test result of HK. The results may vary for different condition.

■Test vehicle SPECIFICATION

METAL CATALYZER / Center Pipe / LEGAMAX Premium

■Components

Products marked with an asterisk (※)　are required to use this kit as twin core kit.

■Remarks

• Need resin protector and alternator bracket modification.
• Pop up engine hood is adopted so when you want to take off the bumper, take out the minus terminal of the battery and wait 3 minutes before start working.
• Washer tank relocation is not required.
• When the twin core kit is installed, you can have effective cooling performance with the bumper protection modification but we can’t guarantee the normal actuation of pop up engine hood.